Growing Guide

Maximize Yield with FunGuy's Mushroom Growing Guide & All In One Mushroom Grow Bags

Maximize Your Yield with the Best Mushroom Growing Guide: FunGuy's All In One Mushroom Grow Bags

As environmentally conscious individuals and nature enthusiasts, you understand the importance of making sustainable choices for our planet. That's why FunGuy has created the ultimate solution for growing your own fresh and healthy mushrooms at home: All In One Mushroom Grow Bag. These mushroom grow bags are designed for ease of use, giving you the best possible results no matter your experience level.

In this guide, we'll take you through the process of inoculating, colonizing, and fruiting your own mushrooms using Mushroom Grow Bags. No matter your level of experience, our step-by-step instructions and expert tips will guide you towards the best possible outcome in mushroom growing. Let's start today!

Step-by-Step Video Guide to Growing Your Own Mushrooms

Maximize Your Yield with the Best Mushroom Growing Guide: FunGuy's All In One Mushroom Grow Bags

Materials Needed:

  • Alcohol wipes (included with the bag)
  • Syringe with liquid culture or spores (purchased separately)
  • (For monotub method) Tub, lid, perlite, distilled water, and aluminum foil

 

Step-by-Step Guide to Growing Your Own Mushrooms:

  1. Sterilize your workstation, hands, and injection port with the alcohol wipes provided.
  2. Inoculate the bag with 3cc (3ml) of liquid culture or spore syringe, injecting directly onto the grain spawn.
  3. Carefully remove the needle and put cap back over the syringe.
  4. Store the bag in a clean, semi-dark room with a temperature of 70-75°F, off the ground and without direct sunlight. Wait 10-14 days until the mushroom grain spawn is fully colonized.
  5. Once the grain is colonized, mix it well with the bulk substrate and allow it to colonize for an additional 10-14 days. The block is fully colonized when it's a solid mass and all white with mycelium.
  6. Sterilize your workstation and open the mushroom grow bag to give the mushroom substrate some fresh air. Cut 1-inch slits below the top two corners of the grow bag and gently pull the bag up and down to allow air in. Mist the substrate with clean or distilled water if necessary. Fold the bag shut to hold in moisture.
  7. Drop the temperature to induce fruiting, usually around 70-75°F.
  8. Store the mushroom bag in a clean, well-lit room with a temperature of 70-75°F for 7-14 days.
  9. Open the bag once a day or every other day to give the substrate fresh air.
  10. Harvest your mushrooms once they're fully grown.

 

Fruiting in a Monotub:

  1. Once the substrate block is fully colonized and all white with mycelium, sterilize your workstation and remove the colonized substrate block from the bag. Place it on aluminum foil in a tub filled with perlite hydrated with distilled water.
  2. Provide the monotub fruiting chamber with 8-12 hours of light per day and a temperature of 70-75°F.
  3. Give the fruiting chamber at least 3-4 fresh air exchanges daily by removing the lid and using it to fan out the old air.
  4. Once the mushrooms or mushroom pins start to form, you can increase the humidity by misting the mushroom fruiting chamber and its contents more frequently.
  5. After 7-14 days, your substrate block will be ready to harvest.

 

Tips and Tricks for a Higher Yield:

  1. High humidity, combined with a steady rate of evaporation from the mushroom bulk substrate caused by increased air exchange (opening the bag), is crucial for pins to form.
  2. Make sure to provide the substrate with adequate misting & light during the fruiting process.
  3. Control the factors of temperature, oxygen level, humidity, and light at the right time to initiate fruiting, usually taking 7-14 days.
  4. Once the mushroom grow kit starts to fruit, open the bag to make more room for the mushrooms to grow and increase air exchange.
  5. A temperature 70-75°F is also necessary to initiate fruiting.
  6. Remember that different mushroom strains may have different growth patterns, so it's important to understand the unique needs of your mushroom species.

With FunGuy's All In One Mushroom Grow Bags, you're on your way to growing the highest quality mushrooms possible!

Grow fresh mushrooms at home with our All In One Mushroom Grow Bag - click now!


The Six Phases of Mushroom Cultivation and a time line from inoculation to harvest.


Fun Guy Mushrooms GIF

Join FunGuy in the heated tussle over our new substrate calculator page and stay updated with our regularly updated site. Click the CSS button below to access the substrate calculator page and optimize your cultivation process. Have any questions or suggestions? Contact us anytime - we're here to help you grow the best mushrooms possible!

Don't miss out on fresh and relevant content - bookmark our site and check back often for new insights and techniques. Let's grow mushrooms together!

Calculate Your Substrate
Calculate Your Moisture Content

Frequently Asked Questions

Growing mushrooms indoors requires several essential items, such as a monotub or grow tent, substrate, mushroom grow bags containing spawn, and a grow light.

To begin, sterilize or pasteurize the substrate and inoculate it with mushroom spawn or spore syringe. Once colonization is complete, transfer the substrate to a fruiting chamber and provide the required humidity, temperature, and light conditions. A grow light can simulate natural daylight and encourage fruiting. A clean and contamination-free growing area is crucial for healthy mushroom growth.

At Funguy Grow Supply, we offer a variety of mushroom growing equipment and supplies to help you get started on your indoor mushroom cultivation journey. Explore our selection today!

Mushrooms eat nutrient rich substrate, which is a bulk organic material that provides the necessary nutrition and energy for mycelium to grow and eventually become mushroom fruiting bodies.

Common substrate options for growing mushrooms include straw or hay, hardwood sawdust, coconut coir, peat moss, and other organic materials such as coffee grounds, worm castings, horse manure, chicken manure, and cow manure.

To prepare the substrate for mushrooms properly, they need to be hydrated and supplemented with additional nutrients such as gypsum, sulfur, nitrogen, or calcium. Subsequently, they are sterilized or pasteurized before being inoculated with colonized substrate, grain spawn, liquid culture, agar plate, agar slant, or spore syringe.

The mushroom mycelium grows and decomposes the organic material in a process known as colonization. Once the fully colonized substrate has hyphal knots visually appearing on the surface, the mushroom mycelium will begin pinning on top of the fully colonized bulk substrate, leading to the development of mushroom caps, gills, and eventually mushroom fruiting bodies.

To improve mushroom growth and the yield of mushroom substrate, several additives are recommended such as gypsum, nitrogen, calcium, agricultural lime, coffee grounds, peat moss, straw or hay, coconut coir, and worm castings. However, it is crucial to use these mushroom substrate additives in the correct amounts to prevent damage to the mycelium.

Gypsum, an excellent source of sulfur and calcium, is an ideal additive and should be used at a volume of 5-10%. Chicken manure is rich in nitrogen but can cause damage to the mycelium and should not exceed 5% volume. Coffee grounds and worm castings can be added in higher volumes of around 10-15% and 10%, respectively.

For further insight, we recommend reading this informative thread on the Shroomery forum about mushroom substrate additives and mushroom supplement additives.

It is possible to grow mushrooms in coffee grounds, which are a common ingredient in many mushroom substrate recipes. Coffee grounds are an excellent substrate for mushroom growth since mycelium thrives on them. Because coffee grounds are rich in nutrients and contain high levels of nitrogen, this leads to the development of robust hyphal knots, followed by strong pinset and fruiting mushroom caps forming a massive canopy.

To use coffee grounds as a substrate for growing mushrooms, it is necessary to sterilize or pasteurize them before adding grain spawn. The recommended spawn to substrate ratio is approximately 1:5. Proper humidity and temperature levels must be maintained when growing mushrooms in coffee grounds.

It is also essential to ensure that the bulk substrate is adequately colonized, and hyphal knots are visible before fruiting. Using a fruiting chamber and growing shrooms monotub style can significantly improve the yield and quality of the mushrooms.

One popular recipe for a mushroom monotub substrate using coco coir is the Casing Layer Recipe. This recipe involves mixing 650g of coco coir, 10 liters of vermiculite, 5 liters of pasteurized straw, 5 liters of pasteurized horse manure, and 2 tablespoons of hydrated lime thoroughly. Add water as necessary to achieve the desired texture, and then fill the monotub with the substrate.

Finally, inoculate the substrate with mushroom spawn, and allow it to colonize before transferring it to a fruiting chamber.

The Shroomery is a valuable resource for growers worldwide, providing a platform for sharing experiences, troubleshooting problems, and connecting with other growers from around the world. Whether you're a beginner or an experienced cultivator, you'll find a wealth of information, resources, and support on the site. From forums and tutorials to cultivation guides and a shroom calculator, the Shroomery offers everything you need to grow mushrooms and other fungi successfully.

How to Use the Shroom Calculator?

The Shroom Calculator is a useful tool for calculating optimal dosages of dried mushrooms based on factors such as mushroom type, body weight, tolerance, and desired effects. The Shroom Calculator functions as a mushroom dose calculator and can help prevent over consumption and ensure a safe and enjoyable experience. Keep in mind that individual sensitivity can vary.

In addition, the Shroomery community provides a platform for sharing experiences, troubleshooting problems, and connecting with other growers from around the world. It's a valuable resource for anyone interested in mushroom cultivation.

Creating a monotub fruiting chamber requires a rubbermaid container or a grow tent, an inexpensive submersible water heater, a temperature and humidity controller, a fan, and a spray bottle or mister.

Start by drilling several holes 2 inches apart throughout the container's sides and bottom for proper air circulation and drainage. Next, fill the container with your substrate mixture and inoculate it with mushroom spawn, spores, or live mycelium. Place an aquatic submersible water heater in a container filled with water and set it to maintain the desired temperature range. Use a temperature and humidity controller to keep the environment consistent and a fan on low to circulate air and maintain proper FAE. Finally, mist the substrate with a spray bottle to maintain optimal humidity levels.

Humidity and Temperature Control for Monotub Fruiting Chambers

Please note that while high range optimal growing temperatures will increase yields, they also increase the chances for bacteria growth and contamination. Growing at a lower optimal temperature may produce similar yield sizes, with a 90-95% probability of low to no contamination.

A monotub fruiting chamber is a controlled environment for the fruiting phase of mushroom growth. To create one, begin by drilling several holes two inches apart throughout the container's sides and bottom for proper air circulation and drainage. Next, fill the container with your substrate mixture and inoculate it with mushroom spawn, live mycelium, liquid culture jars or spores.

Humidity and Temperature Control for Monotub Fruiting Chambers

After inoculating your substrate, place an aquatic submersible water heater in a container filled with water and set it to maintain the desired temperature range. Use a temperature and humidity controller to keep the environment consistent, and a fan on low to circulate air and maintain proper fresh air exchange (FAE). Finally, mist the substrate with a spray bottle to maintain optimal humidity levels.

Please note that while higher optimal growing temperatures may increase yields, they also increase the chances of bacteria growth and contamination. Growing at a lower optimal temperature may produce similar yield sizes, with a 90-95% probability of low to no contamination.

If you're looking to grow mushrooms, one popular recipe for a mushroom monotub substrate using coco coir is the Casing Layer Recipe. To create the mixture, combine 650g of coco coir, 10 liters of vermiculite, 5 liters of pasteurized straw, 5 liters of pasteurized horse manure, and 2 tablespoons of hydrated lime thoroughly. Add water as necessary to achieve the desired texture, and then fill the monotub with the substrate.

After filling the monotub with the substrate, it's time to inoculate it with mushroom spawn. Allow the substrate to colonize before transferring it to a fruiting chamber to grow your mushrooms.